Kirkstall forge, Leeds

Derelict Places

Help Support Derelict Places:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

phill.d

Veteran Member
Veteran Member
Joined
Nov 14, 2007
Messages
525
Reaction score
370
Location
Leeds
Kirkstall forge in Leeds was a massive site covering 65 acres, the area was first used for forging by the Cistercian monks of Kirkstall Abbey. It is thought that a furnace was built to smelt iron ore for the production of iron for nails and tools during the construction of the Abbey. Kirkstall forge finally closed in 2003 bringing to a close 800 years of engineering here.

The whole site was bulldozed around 2008, all except for the historic waterwheel, hammer shop, and slitting mill built way back in 1676. A housing, shop, railway station, and leasure complex are planned for the site. The waterwheel, and slitting mill are to be restored and included in the new development.

4834747083_7898f0ef55_b.jpg

The vast scale of the site before demolition in 2008.
4834747075_80505b5ea4.jpg

The ruins of the roofless waterwheel building, slittling mill, and hammer shop are in the middle of this aerial image taken during demolition. The buildings in the top of the picture have since gone. A big mill pond used to be in front of the waterwheel in years gone by.
4846637953_a30b243362.jpg

A 1925 map showing how the forge took all it's power from the nearby Cow beck, and Mill goit from Newlay.
Traces of the old mill goit can still be found around the site, mostly it is underground these days.
4832184126_6bc3f30b83_b.jpg

The Cow beck travels under Abbey road under this rather nice short tunnel in Hawkswood..
4832179814_2ff10336b0_b.jpg

T'other side as we say in Yorkshire :)
4832134330_737c607102_b.jpg

The Horsforth sewage works may have gone many years ago, but the sewer overflow still pollutes the Cow beck. Skank sewer fresh bars a plenty here!
4832143272_d97891213d_b.jpg

The far extremeties of Kirstall forge are protected by this moat, and concrete fortification in thick woodland. I find the place to be very reminiscent of the Wolfsschanze ruins in East Prussia. It's interesting to see a full tree has grown on the concrete slab here. A dam, and sluice for the forge are located a little further downstream. The forge originally took all it's power from this beck through a series of dams, and sluices, today most of this water feed has since dried up.
4832090054_4f2834c1a6_b.jpg

This is one of the old mill ponds on the site of Kirkstall forge, today the water is contaminated with planktonic algae.
4832038740_185aa1b7ef_b.jpg

This is the dried up remains of the underground mill goit, it seems quite hard to see how these small streams once powered the massive waterwheels, and hammers, but they did. You have to look quite hard to find these old water courses on the forge site today. A few algae contaminated mill ponds still survive, but mostly the old mill goit is underground.
4831339657_25a0d6932c_b.jpg

This old crane has to be the best surviving relic to be found around the old forge buildings. The 2 ton travelling rail crane was built for the Isle of Wight railway in 1865. It was purchased from British Rail, and was fully refurbished for work in the forge in 1967. Kirkstall forge ceased production in 2003, bringing to a close 800 years of engineering here. The building behind is the roofless remains of the 1676 slitting mill.
4832068885_09ac6a422a_b.jpg


4832004778_2673df6f15_b.jpg

The Kirkstall forge waterwheel may have stood silent for many years, but the area was first used for forging by the Cistercian monks. The mill goit runs directly underneath this building. These overgrown buildings are all that remain of the old Slitting Mill built in 1676.
4831999460_84501c67b2_b.jpg

The waterwheel, and helve hammer are sunk into an overgrown pit in the oldest part of the forge. Today it stands silent, roofless, and overgrown. This waterwheel powered the nearby nose helve hammer.
4831979730_e80be42ba2_b.jpg

Latent power!
4831333471_9cf3f784fc_b.jpg

This is the massive 17th century nose helve hammer. I believe this was quite a unique piece of machinery, there were only 16 slitting mills in operation in England by 1785. So this one at Kirkstall would have been significantly important in it's day. A very sturdy block of weathered Oak supports the hammer these days, but at one time this was powered 4 times a minute by the waterwheel. This hammer first produced Iron rods in 1676, they were manufactured here by Dickin and Cotton Ltd.
4831928632_37bdd2ba44_b.jpg

The overgrown ruins of the 1671 slitting mill. Inside is another waterwheel, and two big drop hammers.
2227496952_f65e6f43d7_b.jpg

I'll include these night time shots i got inside the hammer shop on a previous visit.
The massive Kirkstall forge helve hammer was powered by this water wheel. The hammer lifted 4 times a minute. The locals called the noise of the hammer 'The Giant's Footsteps, urban legend says many naughty children were threatened with a visit by said giant if they didn't behave. I think most did after that lol :mrgreen:
2226767899_c9fc0d5e30_b.jpg


2227536664_84c58f69d7_b.jpg


2226793577_c0d487570b_b.jpg

An array of old forging tools that can only be described as museum pieces.
2227606488_40252952ff_b.jpg

These's fire still in the belly of the old forge!
2227475354_acf0f77903_b.jpg

Kirkstall forge-End of an era!

Thanks for looking guys! :)

© phill.d
All my work is © Copyright. No unathorized use allowed.
 
Last edited:
Nice one Phil, a brilliant write up as normal, those Waterwheel shots are awesome, thanks for sharing.:)
 
Thanks for all the positives guys n gals!
Cheers! :)
 

Latest posts

Back
Top