- Joined
- Aug 1, 2006
- Messages
- 747
- Reaction score
- 2,578
Hi All
Day 2 of our 4 day epic north wales trip.
I know this place has been done too death but not by me so I`ll post a few different pictures up.
History :-
The Dinorwic Slate Quarry now home to the Welsh National Slate Museum, located between the villages of Llanberis and Dinorwig. It was the second largest slate quarry in the world, after the neighbouring Penrhyn Quarry. It covered more than 700 acres consisting of two main quarry sections with 20 galleries in each and a number of ancillary workings. Extensive internal tramway systems connected the quarries using inclines to transport slate between galleries and the working sheds.
At its peak in the late 19th century, "when it was producing an annual outcome of 100,000 tonnes", Dinorwic employed more than 3,000 men and was the second largest opencast slate producer in the country. Although by 1930 its working employment had dropped to 2,000, it continued in production until 1969.
Our day started at 08:30 just me and Fluffy as Druid had to pop home, We were still climbing "up" at 16:00 which was when we decided to call it quits and head down (which still took another couple of hours).
To say that I was done in would be a massive understatement, food and beer went down very well that night.
Pictures.
Lower compressor house and compressor still in place.
The next group of pictures are of some of the winding houses at the tops of the inclines, these were used to lower blocks down to the cutting sheds, and raise and equipment to the quarry face.
The frame in some of the pictures is called the "Tank" this is what the wagons sat on.
To get the first stage slate blocks to the top of the "Level" from the working face, the block wagons were hauled up attached to cables these cables held the "Blondin" (the four wheel support), the cable ran from the bottom of the quarry face to the top of the "Blondin tower".
Slab or block wagon.
Next the "Blondin" and "Blondin tower"
Now the slabs or blocks could be taken to the cutting sheds, rows of circular saws would cut the blocks to the correct size then on the other side of the building the blocks would be split in to "Slates"
Well done for getting this far, all comments are most welcome if you want to see more (and you know you do)
head on over to my FlickR page at:-
https://www.flickr.com/photos/newage2/albums/72157669545978534/with/28981632942/
My next Dinorwic post will be tunnels and under ground bits and bobs.
Cheers Newage
Day 2 of our 4 day epic north wales trip.
I know this place has been done too death but not by me so I`ll post a few different pictures up.
History :-
The Dinorwic Slate Quarry now home to the Welsh National Slate Museum, located between the villages of Llanberis and Dinorwig. It was the second largest slate quarry in the world, after the neighbouring Penrhyn Quarry. It covered more than 700 acres consisting of two main quarry sections with 20 galleries in each and a number of ancillary workings. Extensive internal tramway systems connected the quarries using inclines to transport slate between galleries and the working sheds.
At its peak in the late 19th century, "when it was producing an annual outcome of 100,000 tonnes", Dinorwic employed more than 3,000 men and was the second largest opencast slate producer in the country. Although by 1930 its working employment had dropped to 2,000, it continued in production until 1969.
Our day started at 08:30 just me and Fluffy as Druid had to pop home, We were still climbing "up" at 16:00 which was when we decided to call it quits and head down (which still took another couple of hours).
To say that I was done in would be a massive understatement, food and beer went down very well that night.
Pictures.
Lower compressor house and compressor still in place.
The next group of pictures are of some of the winding houses at the tops of the inclines, these were used to lower blocks down to the cutting sheds, and raise and equipment to the quarry face.
The frame in some of the pictures is called the "Tank" this is what the wagons sat on.
To get the first stage slate blocks to the top of the "Level" from the working face, the block wagons were hauled up attached to cables these cables held the "Blondin" (the four wheel support), the cable ran from the bottom of the quarry face to the top of the "Blondin tower".
Slab or block wagon.
Next the "Blondin" and "Blondin tower"
Now the slabs or blocks could be taken to the cutting sheds, rows of circular saws would cut the blocks to the correct size then on the other side of the building the blocks would be split in to "Slates"
Well done for getting this far, all comments are most welcome if you want to see more (and you know you do)
head on over to my FlickR page at:-
https://www.flickr.com/photos/newage2/albums/72157669545978534/with/28981632942/
My next Dinorwic post will be tunnels and under ground bits and bobs.
Cheers Newage
Great looking place, I've been wanting to do this since I spotted the old mining gear on the slope from the main road back in 2013. Looks like you had decent weather too, that makes all the difference. Well done trekking up there. Eagerly awaiting those tunnels n what not!
)
