Low wood gunpowder mills

Derelict Places

Help Support Derelict Places:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

shatters

Veteran Member
Veteran Member
Joined
Apr 18, 2008
Messages
408
Reaction score
8
Location
Ulverston, Cumbria
The Lowwood works was founded in 1798 by 'Daye Barker and Co.' who lived at nearby Birk Dault. Visible at the site today, most of which is much overgrown, is the well preserved clock tower building dated 1849 at the rear. the single clock face faces the wrong direction and is said to have been "for show". The bell, dated 1792, was originally intended for the nearby Backbarrow mill. The site when in operation extended for 547 metres along the River Leven.

In the adjacent wood is an extensive, branched leet fed from the River Leven which powered wheels or turbines and is still supplying power to a turbine which feeds the National Grid. Remains of other turbines can be seen including a Gilkes (of Kendal) model. A 3'6" horse-driven tramway once linked Haverthwaite station with a network through the works to a magazine half a mile away to the south west. Two gunpowder vans are now held locally by the Lakeside Railway Society. Many barrel stencils showing export destinations, notably West Africa, were found on site and are now at the Abbot Hall Museum of Lakeland Life and Industry in Kendal.

Black powder was prepared by mixing the three ingredients of saltpetre, charcoal and sulphur in the damp state for several hours. This was done formerly in barrels by lignum vitae balls, but at Lowwood in the incorporating mill under fine grain crenoidal limestone edge runners, which can be seen under the three remaining substantial mill walls. The object was to coat every charcoal and sulphur particle with a layer of saltpetre. Originally the gearing was above the edge runners, but this caused explosions by bolts etc dropping into the mix. Later the gearing was placed underneath.

The resulting cake was then pressed between layers of copper or ebonite plates in the press house to form press cake. This was then granulated in the corning mill. Here the three substantial walls remain, 25 feet high. A belt elevator took broken pressed cake to seives for granulation or later to a series of toothed metal rollers, before being packed in barrels. Holes can be seen in the walls through which the roller drive shafts passed. This was the most dangerous stage, so the roof and front of the building, as with the incorporating mill, were lightly constructed to blow out in case of explosion. Accidents were frequent. The finished powder was sometimes coated or polished with black lead to keep it dry. Work here finished in 1935

Site map

maplowwoodgunpowderwks.jpg


Head race

0293-1.jpg


Sluice gates

0274.jpg


0264.jpg


Boiler house

0313-1.jpg


Boiler slowly rusting away

philsshit2046.jpg


Incorporating mills- blast walls only remaining

philsshit2095.jpg


philsshit2096.jpg


conservationpic13.jpg


Mill stones

philsshit2099.jpg


Railway lines crossing one of the many feeder races

philsshit2050.jpg


Drying house

0414.jpg


Modern hydroelectric Power station fed from the tail race

philsshit2092.jpg


There's plenty more on the site, a return is on the cards when I get a new camera :)

Phil
 
Very interesting :) I love the mill stones :mrgreen: the watercourse looks like it is flowing, is it part of a river? I am assuming that only the section to the mill was "walled in" so it looks like a canal :confused:
 
the watercourse looks like it is flowing, is it part of a river?

The race is fed from the river Leven and is now used to feed the power station in the last pic.

This is pic of the gates at the top of the head race that still controls the water flow

0394-1.jpg


Phil
 
This is fabulous, Phil. Excellent find, photos and research.
So many interesting things remaining...love the sluice gates.
Well done, that man! :)
 
Thanks for all the comments guys, the site is now a "live" static caravan park, but every time I visit the main entrance is locked up.

Phil
 

Latest posts

Back
Top